|
Product Details:
|
| Deaign: | EN837-1 | Size: | 100mm |
|---|---|---|---|
| Mount: | Bottom | Pressure Range: | 200 Bar Or Customized |
| Case Material: | Stainless Steel | Lens Material: | Glass, Safety Glass |
| Bourton Tube: | Stainless Steel | Movement: | Stainless Steel |
| Dial: | Aluminum | Accuracy: | KL 1.0 |
| High Light: | 100mm hydraulic pressure gauge 3000 psi,hydraulic pressure gauge 3000 psi,KL 1.0 bottom mount pressure gauge |
||
4" 3000 psi Hot Medium Manometer All Stainless Steel Pressure Gauge with Radiating Pipe
Description
Pressure gages should be provided on the suction and discharge of a firewater pump. A suction pressure gage is not required for vertical shaft, turbine type pumps taking suction from a well, open wet pit or offshore facility (as the gage itself would be in the submerged liquid). These gages provide assistance to verify the normal pump function during daily operations and to assist in the conduction of periodic flow performance verification tests. They should be placed or fitted where they are easily readable during operation of the pump by the personnel that attend the operation of the system and give an accurate reading of the performance of the pumping system. Additionally, a pressure transducer can supplement the gages to provide direct readout of pump pressures in the control room or through the distributed control system (DCS) or other utility monitoring system.
Applications
For aggressive gaseous and liquid media that are not highly crystallising, also operates in aggressive environments
Oil and gas industry, chemical and petrochemical industry, pumbling and HVAC, hydraulics and pneumatics
Machine building and general plant construction
Special features
Excellent load cycle stability and shock resistance
Design per EN 837-1
Completely from stainless steel
Scale ranges up to 0 ... 1600 bar
|
Design |
EN 837-1 |
|
Nominal size |
100mm |
|
Accuracy |
1.6, 1.0, 2.5 |
| Pressure range | 200 bar (customized) |
|
Pressure limitation |
Steady: 3/4 x full scale value |
| Medium temperature |
Unfilled gauge: -40 ... +200 °C [-40 ... +392 °F] Gauge with glycerine filling: -20 ... +100 °C [-4 ... +212 °F] Gauge with silicone oil filling: -40 ... +100 °C [-40 ... +212 °F] |
|
Ambiet temperature |
Unfilled gauge: -40 ... +60 °C [-40 ... +140 °F] Gauge with glycerine filling: -20 ... +60 °C [-40 ... +140 °F] Gauge with silicone oil filling: -40 ... +60 °C [-40 ... +140 °F] |
|
Temperature effect |
When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.4 %/10 K of the span |
|
Process connection |
Stainless steel, SUS 304, SUS 316 |
|
Pressure element |
Stainless steel, C-type or helical type |
| Movement | Stainless steel |
| Dial | Aluminium, colorful, without pointer stop pin Black lettering |
| Pointer | Aluminium |
| Case | Stainless steel |
| Ring | Bayonet ring, stainless steel |
| Window | Plastic, glass |
| Unit |
bar, psi, kg/cm2, kPa, MPa |
| Thread | G, BSP, PT, BSPT, NPT |
| Options | Other process connection Surface mounting flange Mounting bracket |
Dimensions
Model M03.01, lower mount (radial)
Ordering information
Model / Dial size / Pressure Range / Process connection / Options
Contact Person: Michael Yang
Tel: +86 15601770036
