The Y-63 63mm pressure gauge is a compact mechanical pressure indicator designed for local pressure monitoring. It features a 63mm dial, bottom connection, 0-16 bar measuring range and dual bar/psi scale for direct pressure reading.
The dual-scale dial displays both bar and psi, allowing operators and maintenance personnel to read pressure using either commonly used pressure unit without requiring a separate unit conversion.
With its bottom connection configuration, the pressure inlet is positioned below the gauge, making this type of pressure gauge suitable for equipment and piping layouts designed for lower-entry installation.
The dry mechanical design uses a pointer and dial to provide direct local pressure indication. It does not require an electronic display or external power supply for basic pressure reading.
The Y-63 is intended for applications where the specified pressure range, measuring medium, connection specification and operating conditions are compatible with the actual gauge configuration.
| Specification | Details |
|---|---|
| Model | Y-63 |
| Product Type | Mechanical Pressure Gauge |
| Dial Diameter | 63 mm |
| Pressure Range | 0-16 bar |
| Equivalent Scale | 0-230 psi |
| Scale Type | Dual Scale, bar / psi |
| Connection Position | Bottom Connection |
| Gauge Design | Dry Type |
| Indication | Analog Pointer and Dial |
| Connection Thread | Brass |
| Case Material | Black Painted Steel Case |
The Y-63 can be considered for local pressure indication on compatible industrial machinery and mechanical equipment.
Typical applications may include:
Industrial machinery
Mechanical equipment
Pressure control assemblies
General equipment monitoring
Machine pneumatic or fluid circuits
The actual application should be confirmed based on the measured medium, pressure range and material compatibility.
The gauge can be used for local pressure indication on compatible pump and fluid-handling systems.
Potential applications include:
Pump systems
Fluid circulation systems
Water-related equipment
Piping assemblies
Pressure monitoring points
Medium compatibility should be verified from the wetted-part material and manufacturer's technical documentation.
For compatible pneumatic systems, a mechanical pressure gauge can provide direct local indication of system pressure.
Potential applications include:
Pneumatic machinery
Compressed-air equipment
Air pressure monitoring
Pneumatic control assemblies
The gauge should only be used with media and operating conditions permitted by its technical specification.
The 63mm dial provides a compact pressure indication format for equipment with limited installation space.
The dual-scale dial provides both bar and psi readings on one gauge, reducing the need for manual unit conversion during routine inspection.
The 0-16 bar range provides a defined pressure measurement span for applications operating within the specified range.
The bottom connection configuration is suitable for installations where the pressure port is located below the gauge.
The dry design provides direct analog pressure indication without requiring an electronic power source for basic local reading.
The pointer and dial allow operators to visually inspect pressure directly at the installation point.
Y-63 is a model designation used for a compact mechanical pressure gauge format. The specific product described here has a 63mm dial, bottom connection and 0-16 bar / 230 psi dual scale.
The 63mm specification refers to the nominal dial or gauge size. It identifies the compact gauge format and should be considered together with the actual mounting dimensions.
A bottom connection pressure gauge has its pressure inlet positioned at the lower side of the gauge. It is also commonly referred to as a lower-entry pressure gauge.
It means the gauge provides a pressure scale from 0 to 16 bar and a corresponding psi scale up to approximately 230 psi.
A dual scale pressure gauge displays two pressure units on the same dial. In this Y-63 model, the specified scales are bar and psi.