Casa >
Notizie
> Notizie aziendali su Modello

Modello

2026-11-18

Ultime notizie aziendali su Modello
Pressure Gauge Selection System
Pressure Gauge Configurator

Select by parameter,
Real-time generation of model codes and specifications

Covers Y25 to Y160, a total of 10 case diameters. Select installation direction, case and connector material, accuracy, scale and thread. The system automatically assembles the model code according to naming rules and outputs the pressure unit conversion result.

10 specifications 15 parameter dimensions 3 selectable units 11 pressure unit conversions
01

Parameter Selection

Options move with the specification, inconsistent parameters will be grayed out and the reason will be marked
ACase Diameter / SpecificationDetermine the range of usable parameters
BConnection DirectionRadial / Axial / Flanged
CType and ShockproofDry type and oil-filled mutual restraint
Shockproof oil
DCase and Connector MaterialCopper / Iron / Stainless Steel
Case Material
Connector Material
EAccuracy LevelThe smaller the value, the higher the accuracy
FScale and UnitThe scale in the table is marked in bar
Dial Unit
Actual Working Pressure (Fill in according to dial unit)
Not Filled
GConnector ThreadChanges with specification
HCustom RequirementsFull specification support
Custom Scale / Nameplate
Custom LOGO
Additional requirements (self-input)0 / 10
Configured Model
—
—
bar —
    02

    Pressure Unit Conversion

    Pressure conversion, 1 bar = 100 kPa = 14.5038 psi
    Input Value
    Source Unit
    Common Presets

    Convert according to international unit standards and common engineering definitions (1 psi = 6894.757 Pa, 1 kgf/cm² = 98066.5 Pa, 1 mmHg = 133.3224 Pa, 1 inH₂O = 249.0889 Pa).

    Three easily confused interfaces

    Gauge PressureTaking atmospheric pressure as zero point, all pressure gauge readings are gauge pressure;Absolute PressureTaking absolute vacuum as zero point, absolute pressure ≈ gauge pressure + 101.325 kPa.

    Dual Scale: Inner circle bar, outer circle psi is a common practice; This page 'Scale' also provides conversions for MPa / psi, which can be directly compared with reports and drawings.

    kgf/cm²Approximately 2% difference with bar, these are two different units, not different ways of writing the same scale.

    Values are all calculated from source values, no human rounding is done; Engineering quotes and scale markings usually take 3-4 significant digits.

    Unit Conversion Table1 unit = the following value
    Unit Pa kPa MPa bar psi kgf/cm²

    The bold '1' indicates that the unit in this row is itself. Water column units are converted according to 4 °C pure water density, mercury column is converted according to 0 °C mercury density, consistent with industry common practice.

    03

    Factory Common Scale Cross-Unit Conversion

    Scales from the model parameter table are automatically converted
    Scale (bar) MPa psi kgf/cm² kPa Applicable Specifications

    'Applicable Specifications' automatically matches each specification scale in the table; The scale system of Y25 and Y30 is obviously smaller than medium and large specifications, and small specifications do not produce high-pressure scales. This table is for accurate conversion values, and the dial scale markings follow the integer rules in Section 04.

    04

    Model Naming and Selection Rules

    Automatically executed based on parameter table annotations

    Naming Rules

    Letters are assembled in order, numbers are case diameters, separated by '-' in between.

    YPressure Gauge (Fixed First Position)
    NShockproof (Oil-filled shockproof)
    BStainless Steel (Case)
    FAll Steel (Connector Stainless Steel)
    ZAxial Direction
    TFlanged
    Example:YNBFZT-100→ Axial direction with flange, 100 mm diameter, stainless steel case, all steel, oil-filled shockproof pressure gauge

    Mutual Restraint

    Dry type and oil-filled mutual restraint.When selecting dry type, oil-filled or silicone oil cannot be selected; After selecting shockproof oil, dry type cannot be selected.

    Iron case and oil-filled mutual restraint.Iron case (coated iron case) can only be dry type; Oil-filled shockproof requires a stainless steel case.

    Restraints come from parameter table annotations:
    'Select dry type, iron case cannot select shockproof oil, after selecting shockproof oil, cannot select dry type or iron case'.

    Scale Verification

    General engineering practice: Static pressure is 1/3 to 3/4 of the scale, dynamic or impulse pressure is reduced by one level.After filling in 'Actual Working Pressure', this page will give real-time scale utilization ratio and recommendations. Less than 30% indicates the scale is too large, wasting reading accuracy; More than 75% has the risk of overpressure.Recommended range 30% – 75%

    Dial Value Rounding

    When selecting bar, keep the value in the table; When selecting MPa, take 1/10 of the original value; When selecting psi, take 14.5 times the original value and round it, keeping at most three significant digits, and add zeros at the end.

    Example: 15 bar → 1.5 MPa → 218 psi (15 × 14.5 = 217.5, rounded to three significant digits is 218).

    When 'Custom Scale / Nameplate' or 'Custom LOGO' is selected as 'Yes', additional requirements must be filled in with at least 10 characters, otherwise the selection form cannot be copied.

    Anhui Xingyi Instrument Co., Ltd.

    Data Source:

    (Sheet1, 10 models × 15 parameter columns, including 3 lines of annotations).Interface Description: Duplicate items in the original table 'Scale (bar)' column (e.g., 50 appearing twice) have been removed; The scale unit cells in the Y25 row were originally numerical values 50100150200300400, this page restores them to 50 / 100 / 150 / 200 / 300 / 400, please verify with the actual product directory.This page is a model selection auxiliary tool. The final specifications, material part numbers, and prices should be confirmed with the official quotation and drawings; The page is a single file offline version, and the data has been embedded in the code and cannot be called online.